Clarksdale, Mississippi anti-film (well, sortof)…
In May we took a great trip through Birmingham, AL, Clarksdale, MS, and Memphis, TN and I took an assortment of film cameras with me. I chose my new favorite, Canon Canonet QL17 GIII,
the “old lady” original Diana,
and old favorite Olympus XA.
The odd thing was that when we got to Clarksdale, I pulled out each camera and every one had an “issue.”
Don’t know if there were anti-film spirits in the “shack” we were staying in or what. I first grabbed the Diana and the shutter button seemed to be sticking once triggered…I shot two frames before I realized this. It’s tough with 120 film in square format too because you only get 12 exposures, so each one is precious. I kept trying the shutter button on the second frame (luckily, the Diana “allows” for multiple exposures and at this point I knew I blew the first two anyway) and couldn’t get her to cooperate. So then, I’m a bit bummed cause I really thought that the place we were staying (Shack Up Inn in Clarksdale) would lend itself to Diana’s style…oh well. I placed that camera back into the bag.
The second one I pulled out was the XA…after the Diana problem, I decided I should check it before putting film in it. I opened it up and looked through the viewfinder to check that the meter was reading properly. I got nothing, nada…super bummed now. It seemed that the battery was dead in this one. Back in the bag.
So, the third and final film camera I brought was the Canonet…I had just used it (as I have continuously since I got it), so felt assured all was well. I loaded what I didn’t realize was a roll of 12 exp color film. Usually I use 24 or 36 exposure, but sometimes I purchase lots of expired film, so must have gotten the 12 exp in one of those lots. Once I loaded it, it didn’t seem to be resetting when I shot an image. The winder would not budge after each exposure. I had never had an issue with the winder on this camera, so was quite baffled. I figured it was the mechanism that resets the winder each time the shutter fires, so thought I could bypass it by hitting the rewind button to release it each time I took a shot. I did this for many frames on this roll, then wondered if the film was actually being transported when I was able to wind. Luckily, the Canonet has nice features like an indicator for film in the camera and also for film transport. I checked it as I wound the next time and it looked fine. I don’t know how many frames I ran off this way, but the method I was using would not really indicate when I was at the end of the roll…so I think I may have ended up with about 12 exp on the last frame 8-\ because when I decided to rewind and try another roll, I found that the roll was only a 12 exp. Oops! I did load another roll into the Canonet and the winder worked flawlessly, so I don’t quite know what happened there. Think I did get some good shots with it through our trip.
I have checked all the cameras and the Canonet hasn’t done the same thing again, the Diana is still being quirky, but I’m not sure how to work on a plastic camera :-\ (edit: with some tips from the web, I have lubed the shutter on the Diana and it seems to be working fine now), and when I checked the XA here at home the battery was fine…very strange indeed!